Table of Contents
Advertisement
AcuLink 810 Data Aquisition Server
The AcuLink 810 will reboot after the firmware update. The reboot will take approximately
1-2 minutes to complete, the user will be directed to the login screen after the reboot.
16.2 Remote Update
In order to user the remote firmware update there needs to be an internet connection to the
AcuLink. Once there is a sufficient connection to the internet users can access Accuenergy's
Remote firmware server in order to update the firmware of the AcuLink 810.
Click on the Check button.
118
V: 1.08 Revised: May 2020
www.accuenergy.com
Advertisement
Table of Contents
