Table of Contents
Advertisement
AcuLink 810 Data Aquisition Server
8.1.2 WiFi
There are two WiFi modes in the AcuLink 810, Access point and station.
NOTE: When using WiFi ensure that the provided antenna is installed on the AcuLink 810
unit.
• Access Point Mode - Is the default WiFi configuration for AcuLink 810, where the gateway
will act as a wireless access point and will allow other wireless devices to connect and
access the AcuLink 810.
• In Access Point mode, users can configure the SSID, Network Key and IP of the AcuLink
810 as well as the DHCP DNS servers.
• The default AP mode settings:
• SSID - AcuLink810-WIFI-SERIAL#810
• Network Key - accuenergy
• IP - 192.168.100.1
NOTE: For steps on how to access the web interface via WiFi AP mode refer to chapter 6 sec-
tion 6.1.2.
38
V: 1.08 Revised: May 2020
www.accuenergy.com
Advertisement
Table of Contents
