Table of Contents
Advertisement
8.1.5 Default Routing Interface
The AcuLink 810 supports a routing default interface setting which allows users to configure
which port to use for primary routing to external networks. Since there are multiple ways
the user can connect such as Ethernet1/2, WIFI, RSTP, this setting will establish which one is
used for the main routing. The other interfaces can be used for local routing if the users has
them connected.
Users can select the default routing interface as:
•
Ethernet 1
•
Ethernet 2
•
WIFI - only valid if WIFI is configured for station mode
•
Bridge (RSTP) - only valid if RSTP is enabled
www.accuenergy.com
Chapter 8: System Settings
V: 1.08 Revised: May 2020
41
Advertisement
Table of Contents
