Table of Contents
Advertisement
Chapter 7: Device Templates
7.1.3 Typical Energy Meter Template
The Typical Energy Meter Template allows users to create a Modbus Template for their third
party device and have the ability to post data to our cloud based energy management soft-
ware AcuCloud . To create a device template that allows third party devices to post data to
the AcuCloud software click on the Typical Energy Meter Template tab.
This page will have the following sections:
1. Device
Under the device section users can enter in the Template name and the version number.
Once all device settings are configured click on Save Device Info .
2. Block
Users can create the required register blocks for their device, where the function, starting
address in hex, and the register count must be specified. Once a block is created click on
Save Block , users can create multiple blocks for the device template. All created blocks will
appear in the block table located further down the page.
29
V: 1.08 Revised: May 2020
www.accuenergy.com
Advertisement
Table of Contents
