Table of Contents
Advertisement
AcuLink 810 Data Aquisition Server
8.2 Time & Date
The Date & Time page under the System Settings tab is where users can configure the local
time of the gateway. The AcuLink 810 supports NTP (Network Time Protocol) where it can
synchronize its time to NTP servers across the network.
NOTE: In order to synchronize the AcuLink 810's time to the NTP time servers an internet
connection is required.
If users to not want to sync the device time to an NTP server they can disable the NTP setting
and configure the time and date manually.
• Time Sync: Users can force the time to update to the NTP on the AcuLink 810 by clicking
the Sync button.
• NTP Time Servers: The AcuLink 810 supports can be synced with up to 3 time servers. By
default the gateway uses
own time servers as needed.
Examples of North American NTP servers are:
0.us.pool.ntp.org
1.us.pool.ntp.org
2.us.pool.ntp.org
3.us.pool.ntp.org
For more NTP servers based on region, visit the following site:
http://www.pool.ntp.org/en/
• Time Zone: Users can select the timezone where the gateway is installed in the drop down
menu. Alternatively users can simply click on the region/country on the map displayed to
select the desired timezone.
Once the time and date is configured users will notice the desired time displayed on the top
right corner of the web interface.
42
V: 1.08 Revised: May 2020
0.u.pool.ntp.org
time server. Users can remove and add their
www.accuenergy.com
Advertisement
Table of Contents
