Chapter 16: Firmware Update
The firmware of the AcuLink 810 can be updated directly from the web interface. To do so
click on the System Settings tab and select Firmware Update .
This page lists the current firmware of the gateway. There are two methods in which users
can update the firmware of the 810, either by using the remote firmware function or by man-
ually updating the firmware.
16.1 Manual Update
To update the firmware manually users must have the required firmware file. Start by up-
loading the firmware file, the file type is .aup.
NOTE: for firmware files please contact Accuenergy Technical Support.
www.accuenergy.com
Chapter 16: Firmware Update
V: 1.08 Revised: May 2020
115