Table of Contents
Advertisement
9.1.4 TCP Devices
The AcuLink 810 can support up to 100 Modbus TCP devices where the devices will need to
be on the same network as the gateway.
Acuvim II Series Meter
9.1.5 Adding Modbus TCP Device
To add a Modbus TCP device click on Add Device from the Modbus Devices page under the
Devices tab. The following fields will need to be configured:
Device Name: Enter the device name of the TCP device
Serial Number: Enter the serial number of the device, the serial number must be unique and
consisting of only letters and numbers.
Template: Select the Modbus template for the TCP device, for more information regarding
Modbus templates see sections 7.3 of the user manual.
www.accuenergy.com
Netwiork Switch
Ethernet Cable
D A T A A C Q U S I T I O N S E R V E R
V: 1.08 Revised: May 2020
Chapter 9: Protocols
Ethernet Cable
51
Advertisement
Table of Contents
