Chapter 9: Protocols
9.2.2 Scan & Remote Configuration
Once the Local Configuration has been set, users can then scan for remote radio AcuMesh
transceivers. Click on the Scan & Remote Configuration tab on the AcuMesh configuration
page, users will be directed to the following page.
The Local configuration will appear under the Node Scan section. This will show the Net-
work ID that will be scanned, the Encryption, and the Channel Mask that is being used.
The network Hops configuration is the number of times the mesh network will be scanned,
the range is from 1-7 network hops.
57
V: 1.08 Revised: May 2020
www.accuenergy.com