Teledyne Linea GigE LA-GM-04K08A User Manual page 95

LLA Supported
DHCP Supported
Persistent IP Supported
GVCP Extended Status
Codes
Gev MCP HostPort
Gev MCDA
Gev MCSP
Stream Channel Interface
Index
Gev SCP HostPort
Gev SCDA
Gev SCSP
Gev First URL
Gev Second URL
Gev Major Version
Gev Minor Version
Manifest Entry Selector
XML Major Version
XML Minor Version
Linea GigE Series Camera
GevSupportedIPConfigurationLLA
GevSupportedIPConfigurationDHCP
GevSupportedIPConfigurationPersistentIP
GevGVCPExtendedStatusCodes
GevMCPHostPort
GevMCDA
GevMCSP
GevSCPInterfaceIndex
GevSCPHostPort
GevSCDA
GevSCSP
GevFirstURL
GevSecondURL
GevVersionMajor
GevVersionMinor
DeviceManifestEntrySelector
DeviceManifestXMLMajorVersion
DeviceManifestXMLMinorVersion
Indicates if LLA (Auto-IP) is supported by the
selected interface. The LLA method automatically
assigns the camera with a randomly chosen
address on the 169.254.xxx.xxx subnet. After an
address is chosen, the link-local process sends an
ARP query with that IP onto the network to see if it
is already in use. If there is no response, the IP is
assigned to the device, otherwise another IP is
selected, and the ARP is repeated. Note that LLA is
unable to forward packets across routers. LLA is
the recommended scheme when only one NIC is
connected to GigE cameras; ensure only one NIC is
using LLA on your PC, otherwise IP conflicts will
result. (RO)
Indicates if DHCP is supported by the selected
interface. This IP configuration mode requires a
DHCP server to allocate an IP address dynamically
over the range of some defined subnet. The
camera must be configured to have DHCP enabled.
This is the factory default settings. The DHCP
server is part of a managed network. Windows
itself does not provide a DHCP server function
therefore a dedicated DHCP server is required. The
DALSA Network Configuration Tool can be
configured as a DHCP server on the NIC used for
the GigE Vision network. (RO)
Indicates if Persistent IP is supported by the
selected interface. This protocol is only suggested if
the user fully controls the assignment of IP
addresses on the network and a GigE Vision
camera is connected beyond routers. The GigE
Vision camera is forced a static IP address. The
NIC IP address must use the same subnet
otherwise the camera is not accessible. If the
camera is connected to a network with a different
subnet, it cannot be accessed. (RO)
Enables generation of extended status codes. (RO)
Indicates the port to which the device must send
messages. (RO)
Indicates the destination IP address for the
message channel. (RO)
This feature indicates the source port for the
message channel. (RO)
Index of network interface. (RO)
Indicates the port to which the device must send
the data stream. (RO)
Indicates the destination IP address for this stream
channel. (RO)
Indicates the source port of the stream channel.
(RO)
Indicates the first URL to the XML device
description file. (RO)
Indicates the second URL to the XML device
description file. (RO)
Major version of the specification. (RO)
Minor version of the specification. (RO)
Selects the manifest entry to reference.
Indicates the major version number of the XML file
of the selected manifest entry. (RO)
Indicates the Minor version number of the XML file
of the selected manifest entry. (RO)
Operational Reference • 93
1.00
Invisible
1.00
Invisible
1.00
Invisible
1.00
Invisible
1.00
Invisible
1.00
Invisible
1.00
Invisible
1.00
Invisible
1.00
Invisible
1.00
Invisible
1.00
Invisible
1.00
Invisible
1.00
Invisible
1.00
Invisible
1.00
Invisible
1.00
Invisible
1.00
Invisible
1.00
Invisible