Teledyne Linea GigE LA-GM-04K08A User Manual page 59

Calibrate PRNU
No Error
Calibration Failed
Camera Busy
Timeout Error
Memory Error
Target Error
Save Calibration
Reset Coefficients
Flat Field Correction Pixel
X Coordinate
Flat Field Correction Gain
Flat Field Correction
Offset
Linea GigE Series Camera
flatfieldCalibrationPRNU
NoError
GenericError
BusyError
TimeoutError
MemoryError
TargetError
flatfieldCalibrationSave
flatfieldResetCoefficients
flatfieldCorrectionPixelXCoordinate
flatfieldCorrectionGain
flatfieldCorrectionOffset
Performs Photo Response Non Uniformity (PRNU)
calibration to a targeted, user-defined value. PRNU
calibration eliminates the difference in responsivity
between the most and least sensitive pixel, creating a
uniform response to light.
No Error
FPN calibration failed.
The camera is busy and cannot perform the FPN
calibration.
The FPN calibration did not finished on time.
The camera cannot allocate the memory needed for FPN
calibration.
The PRNU calibration was not able to reach the targets.
Save the calibration performed by flatfieldCalibrationFPN
and flatfieldCalibrationPRNU to the active set.
Reset all FFC coefficients to pass-through.
Specifies the X coordinate of the flat field pixel coefficient
to access.
Sets the gain to apply to the currently selected pixel.
Sets the offset to apply to the currently selected pixel.
Operational Reference • 57
1.00
Guru
DFNC
1.00
Guru
DFNC
1.00
Guru
DFNC
1.00
Guru
DFNC
1.00
Guru
DFNC
1.00
Guru
DFNC