Teledyne Linea GigE LA-GM-04K08A User Manual page 81

Metadata Format
The Linea GigE metadata is formatted as follows:
QWORD # Bits
63:48
47:40
QWORD 1
39:36
35:32
31:0
63:56
55:32
31:28
27:25
24:22
QWORD 2
21:19
18:16
15:0
63:0
QWORD 3
63:32
QWORD 4
31:0
63:32
QWORD 5
31:0
63:32
QWORD 6
31:0
Linea GigE Series Camera
Feature Name
Gain - Digital All
Line Status All
Flat Field Correction
Current Active Set
Cycling Preset Current
Active Set
Exposure Time
Unused
Line Trigger Counter
Unused
Counter2 Active
Counter1 Active
Timer2 Active
Timer1 Active
Line Counter
Timestamp
Timer1 Value
Counter1 Value
Timer2 Value
Counter2 Value
Camera ID
FrameCounter Value
Description
The gain-digital all as an amplification factor
applied to the image.
The current status of all available line signals in
a single bitfield. The order is Line1, Line2,
Line3, ...
The index of the current set of Flat Field
coefficients being used.
The index of the currently active cycling preset.
The exposure time, where 1 DN = 10 ns.
Counts the total # of line triggers received
during the current frame
The status of counter # where:
0=Idle
1=Trigger Wait
2=Active
3=Completed
4=Overflow
5=Wait
The status of timer # where:
0=Idle
1=Trigger Wait
2=Active
3=Completed
5=Delaying
Specifies the position of a line within the
current frame.
The value of the timestamp counter.
The value of timer 1.
The value of counter 1.
The value of timer 2.
The value of counter 2.
The identifier of the device. This may be user-
defined, but defaults to the serial number.
Increments at the start of each frame.
Operational Reference • 79