File Access Control Category; File Access Control Feature Descriptions - Teledyne Linea GigE LA-GM-04K08A User Manual

File Access Control Category

The File Access control in CamExpert allows the user to quickly upload various data files to the
connected Linea GigE. The supported data files are for Linea GigE firmware updates and Flat Field
coefficients.

File Access Control Feature Descriptions

Display Name
File Selector
Firmware
Factory FlatField coefficients
User FlatField coefficients 1
User FlatField coefficients 2
User FlatField coefficients 3
User FlatField coefficients 4
User Defined Saved Image
File Operation Selector
Open
Close
Read
Write
Delete
File Operation Execute
File Open Mode
Read
Write
98 • Operational Reference
Feature & Values
FileSelector
Firmware1
FlatFieldCoefficients0
FlatFieldCoefficients1
FlatFieldCoefficients2
FlatFieldCoefficients3
FlatFieldCoefficients4
userDefinedSavedImage
FileOperationSelector
Open
Close
Read
Write
Delete
FileOperationExecute
FileOpenMode
Read
Write
Description
Selects the file to access. The file types which are accessible
are device-dependent.
Upload new firmware to the camera which will execute on the
next camera reboot cycle. Select the DeviceReset feature
after the upload completes.
Select factory flatfield coefficients1. These are the factory
values when the camera sensor Gain is 1.0.
Select to read (download), write (upload) or delete the User
flatfield coefficients 1.
Select to read (download), write (upload) or delete the User
flatfield coefficients 2.
Select to read (download), write (upload) or delete the User
flatfield coefficients 3.
Select to read (download), write (upload) or delete the User
flatfield coefficients 4.
Upload and download an image in the camera.
Selects the target operation for the selected file in the device.
This operation is executed when the File Operation Execute
feature is called.
Select the Open operation - executed by
FileOperationExecute.
Select the Close operation - executed by
FileOperationExecute
Select the Read operation - executed by
FileOperationExecute.
Select the Write operation - executed by
FileOperationExecute.
Select the Delete operation - executed by
FileOperationExecute.
Executes the operation selected by File Operation Selector on
the selected file.
Selects the access mode used to open a file on the device.
Select READ only open mode
Select WRITE only open mode
Device
Version
& View
1.00
Guru
1.00
Guru
1.00
Guru
1.00
Guru
Linea GigE Series Camera