Teledyne Linea GigE LA-GM-04K08A User Manual page 73

Cycling Preset Current
Active Set
Features Activation
Selector
Exposure Time
Exposure Delay
Gain
Flat Field Correction
Output Lines
Features Activation Mode
Off
Active
Preset Configuration
Selector
Exposure Time
Gain
Flat Field Correction
Current Active Set
User Flatfield 1
User Flatfield 2
User Flatfield 3
User Flatfield 4
Line Selector
Line 3
Line 4
Line 5
Line 6
Linea GigE Series Camera
cyclingPresetCurrentActiveSet
cP_FeaturesActivationSelector
ExposureTime
ExposureDelay
FlatFieldCorrection
OutputLineControl
cP_FeaturesActivationMode
Active
cP_PresetConfigurationSelector
cP_ExposureTime
cP_Gain
cP_flatfieldCorrectionCurrentActive
Set
UserFlatfield1
UserFlatfield2
UserFlatfield3
UserFlatfield4
cP_LineSelector
Returns the index of the currently active cycling preset.
Selects the feature to control by the
cP_FeaturesActivationMode feature.
The cP_FeaturesActivationMode feature controls the
exposure time.
The cP_FeaturesActivationMode feature controls the
exposure delay.
Gain The cP_FeaturesActivationMode feature controls the Gain.
The cP_FeaturesActivationMode feature controls the flat
field correction.
The cP_FeaturesActivationMode feature controls the output
lines.
Enables the selected feature to be part of the cycling.
When activating the selected feature, this will
automatically set the corresponding standard camera
feature to read only.
Off Exclude the selected feature from the cycling.
Activate the selected feature in the cycling.
Selects the cycling preset to configure.
Sets the exposure time (in microseconds) for the selected
set.
Sets the selected gain as an amplification factor applied to
the image.
Specifies the current set of Flat Field coefficients to use.
Sets User Flat Field 1 coefficient table as the current Flat
Field.
Sets User Flat Field 2 coefficient table as the current Flat
Field.
Sets User Flat Field 3 coefficient table as the current Flat
Field.
Sets User Flat Field 4 coefficient table as the current Flat
Field.
Selects which physical line (or pin) of the external device
connector to configure.
Index of the physical line and associated I/O control block
Line3
to use.
Line4 Index of the physical line and associated I/O control block
to use.
Index of the physical line and associated I/O control block
Line5
to use.
Line6 Index of the physical line and associated I/O control block
to use.
Operational Reference • 71
1.00
Guru
DFNC
1.00
Expert
DFNC
1.00
Expert
DFNC
1.00
Expert
DFNC
1.00
Expert
DFNC
1.00
Expert
DFNC
1.00
Expert
DFNC
1.00
Expert
DFNC