File Access Control Category - Teledyne Falcon4 57M User Manual

Activate Hot Plug ActivateHotPlug
8b/10b ErrorCount LinkErrorCount
Refresh Features ReadLinkError
CameraLink HS clDeviceClockFrequency
Speed in Mbps

File Access Control Category

The File Access control in CamExpert allows the user to quickly upload various data files to the
connected Falcon4 camera. The supported data files are for Falcon4 firmware updates, Flat Field
coefficients, and files to debug the camera.
Display Name
File Selector
Firmware
User Flat Field 1
User Flat Field 3
Factory Global Flatfield
Factory Rolling Flatfield
Defect Map
Test File
Global Shutter,Tap 1,Column
1, Even Rows
Global Shutter,Tap 2,Column
1,Odd Rows
Global Shutter,Tap 3,Column
2, Even Rows
Global Shutter,Tap 4,Column
2,Odd Rows
Global Shutter,Tap 5,Column
3,Even Rows
Global Shutter,Tap 6,Column
3,Odd Rows
Global Shutter,Tap 7,Column
4,Even Rows
Global Shutter,Tap 8,Column
4,Odd Rows
Rolling Shutter,Tap
1,Column 1,Even Rows
Appendix A: GenICam Commands
Feature & Values
FileSelector
Firmware1
FlatFieldCoefficients1
to
FlatFieldCoefficienets3
FlatFieldCoefficientsFact1
FlatFieldCoefficientsFact2
Logs
DefectMap
LutLuminance1Tap1
LutLuminance1Tap2
LutLuminance1Tap3
LutLuminance1Tap4
LutLuminance1Tap5
LutLuminance1Tap6
LutLuminance1Tap7
LutLuminance1Tap8
LutLuminance2Tap1
Performs a Hot Plug event. This event will cause the
camera to:
• disconnect from the frame grabber
• load the configuration specified by NextDeviceConfig if it
has changed since the last connection
• reconnect to the frame grabber.
Indicates the number of low level data errors on the
connection between the camera and frame grabber. <RO>
Possible values are: 0 to 4294967295
Updates the LinkErrorCount feature with the latest count of
the link errors.
Indicates the Camera Link HS clock frequency. The CLHS
clock runs at 3125 Mbits/second.
Description
Selects the file to access. The file types which
are accessible are device-dependent.
Writing a new firmware here will update the
camera.
A tiff containing the flat field correction
to coefficients (i.e. gain and offset)
A tiff containing the factory flat field correction
coefficients for global shutter operation (i.e.
gain and offset)
A tiff containing the factory flat field correction
coefficients for rolling shutter operation (i.e.
gain and offset)
Logs Dowload camera logs. This is a zipped file
Download camera defect map.
TestFile File that allows user to test file transfer.
Luminance LUT for Global Shutter Tap 1,, Pixels
0 - 1791, Even Rows.
Luminance LUT for Global Shutter Tap 2, Pixels
0 - 1791, Odd Rows
Luminance LUT for Global Shutter Tap 3, Pixels
1792 - 3583, Even Rows
Luminance LUT for Global Shutter Tap 4, Pixels
1792 - 3583, Odd Rows
Luminance LUT for Global Shutter Tap 5, Pixels
3584 - 5375, Even Rows
Luminance LUT for Global Shutter Tap 6, Pixels
3584 - 5375, Odd Rows
Luminance LUT for Global Shutter Tap 7, Pixels
5376 - 7167, Even Rows
Luminance LUT for Global Shutter Tap 8, Pixels
5376 - 7167, Odd Rows
Luminance LUT for Rolling Shutter Tap 1,, Pixels
0 - 1791, Even Rows
Falcon 4 Camera User's Manual • 57
DFNC
Beginner
DFNC
Beginner
DFNC
Beginner
DFNC
Beginner
Standard
& View
Guru