Use Of A Function Group Number For The Identification Of Parameters - Mitsubishi Electric FR-CS82S-025 Instruction Manual

5.1.2 Use of a function group number for the
identification of parameters
A parameter identification number shown on the PU can be switched from a parameter number to a function group number.
As parameters are grouped by function and displayed by the group, the related parameters can be set continually at a time.
 Changing a parameter identification number to a function group number
Pr.MD setting
The setting of parameter identification number remains the same as
0
the last setting.
The parameter number is used for the identification of parameters,
1
and displayed in numerical order.
The function group number is used for the identification of
2
parameters, and displayed in alphanumeric order.
Operating procedure
1.
Turning ON the power of the inverter
The operation panel is in the monitor mode.
2.
Selecting the parameter setting mode
Press to choose the parameter setting mode.
3.
Selecting a parameter
Press or
Press to confirm the selection. The setting "
4.
Selecting the use of the function group number
Press or
parameter setting. "
Description
until " " (Group parameter setting) appears.
to change the set value to "
" and " " are displayed alternately after the setting is completed.
(initial value)" will appear.
" (function group number). Press
2
2
3
4
5
6
7
8
9
to select the Group
10
79
5. PARAMETERS
5.1 Parameter list