Mitsubishi Electric FR-CS82S-025 Instruction Manual page 210

 Clearing the fault history
• Set Er.CL Fault history clear = "1" to clear the fault history.
Operating procedure
1.
Turning ON the power of the inverter
The operation panel is in the monitor mode.
2.
Selecting the parameter setting mode
Press to choose the parameter setting mode. (The parameter number read previously appears.)
3.
Selecting the parameter number
Turn or until "
value)" appears.
4.
Fault history clear
Press or to change the set value to "
" " and " " are displayed alternately after the parameters are cleared.
• Press or to read another parameter.
• Press to show the setting again.
• Press twice to show the next parameter.
" (Fault history clear) appears. Press
". Press to start clearing.
to read the present set value. "
6. PROTECTIVE FUNCTIONS
6.3 Check and clear of the fault history
1
2
3
5
(initial
6
7
8
9
10
209