Enter Setup
Set Scanner Name
You may scan the below barcode to set the name of your scanner. The maximum length is 5 characters (HEX values from 0x20 to
0x7E)
Set Date and Time
You may use the following command to set the date and time on your scanner:
WLSTIMyyyymmddhhmmss (yyyy: The desired year; mm: The desired month; dd: The desired day; mm: The desired
month; ddmmss: The desired time)
Example: Set the date to February 5
Enter:
~<SOH>0000@WLSTIM20180205103011;<ETX>
Query Current Date and Time
After scanning the barcode below, the current date and time in YYYYMMDDHHMMSS format will be sent to the host device.
For example, query result "20180205103011" means February 5
** Exit Setup
Scanner Name
th
2018 and time to 10:30:11
th
Query Current Date and Time
2018 10:30:11.
46