Xantrex Freedom XC 1800 Owner's Manual page 8

Product Safety Information
ELECTRICAL SHOCK AND FIRE HAZARD
Do not open. No serviceable parts inside. Provided with
n
integral protection against overloads. Bonding between
conduit connections is not automatic and must be
provided as part of the installation.
Read guide before installing or using.
n
Do not cover or obstruct ventilation openings.
n
Do not mount in zero-clearance compartment –
n
overheating may result.
Do not expose to rain or spray. Indoor use only.
n
Do not connect AC OUT to any other source of power.
n
Damage to unit may occur.
For AC IN and AC OUT, use wires suitable for at least
n
90°C.
Failure to follow these instructions can result in injury or
equipment damage.
viii
CAUTION
NOTES:
Follow these instructions and those published by the
n
battery manufacturer and the manufacturer of any
equipment you intend to use in the vicinity of the battery.
Review cautionary markings on these products and on the
engine.
Freedom XC 1800 (12VDC) Inverter Charger products are
n
designed for deep cycle lead-acid batteries. See warning
below when connecting to lithium ion batteries.
Do not use transformerless battery chargers in conjunction
n
with the inverter/charger due to overheating.
LITHIUM ION BATTERY TYPE HAZARD
Make sure to use a lithium ion battery pack that includes a
n
certified Battery Management System (BMS) with built-in
safety protocols. Follow the instructions published by the
battery manufacturer.
Connect the inverter/charger to a -volt battery or battery
n
system ONLY.
Failure to follow these instructions can result in serious injury or
equipment damage.
Freedom XC 1800 (12VDC) Owner's Guide
CAUTION