Operating Limits; Power Output; Input Voltage - Xantrex Freedom XC 1800 Owner's Manual

Operating Limits

These are the operating limits of the Freedom XC:

Power Output

n

Input Voltage

n
Overload Conditions
n
High Surge Loads
n
Over-temperature Conditions
n
975-1175-01-01
Power Output
The Freedom XC can deliver up to 1800 W
grade sine wave AC power. The wattage rating applies to resistive
loads such as incandescent lights.
Input Voltage
The allowable Freedom XC input battery voltage ranges are
shown in the following table:
Table 12 Input battery voltage range
Operating Battery
Condition Voltage
Full
Operating LBCO–18.0 V
Range
Low Voltage
< LBCO+0.2 V
Recovery
1
As the temperature rises, it will gradually reduce its continuous power output from 1800 W at 40°C
ambient to 1500 W before the over-temperature shutdown occurs at 60°C ambient. See Specifications on
page 72.
b
To set LBCO, see Adjusting Feature Settings in Configuration Mode on page 43.
c
To set LBCO Shutdown Delay Timer, see Input Voltage on page 57.
Operating Limits
1
of continuous utility
Comment
Assuming the battery is full, the inverter/charger
will operate until battery voltage goes past below
b
LBCO and LBCO Shutdown delay timer
Inverter is able to recover and continue to
operate.
c
.
57