Side Panel - Xantrex Freedom XC 1800 Owner's Manual

Side Panel

Side Panel
1 2
4
Figure 4 Side Panel
ELECTRICAL SHOCK HAZARD
For item 1: Use a torque screwdriver to tighten the
n
captive nut panel screw to 5 in-lb (0.56 N-m) torque to
ensure a proper ground connection and a required tool
access to the wiring compartment.
For item 4: Use a torque screwdriver to tighten the bolt on
n
the DC ground lug to a torque of 23 in-lb (2.6 N-m) of force.
For item 4: Apply an anti-corrosion compound to the
n
copper wire prior to connecting to the DC ground lug.
Failure to follow these instructions can result in death, serious
injury, or equipment damage.
10
WARNING
Table 3 Side Panel Features
Feature
1
2
3
3
4
Description
Captive nut panel screw holds the wiring
compartment cover in place. See WARNING above.
Wiring compartment cover protects the wiring
compartment from debris and keeps the cables
secure. Using the captive nut panel screw, the cover
can be opened and lifted out during wiring. See
WARNING on the left.
15 A supplementary protector with reset button
Press to recover from an overload condition.
Provides protection for the wiring of the GFCI duplex
receptacle AC output.
DC Grounding lug provides a ground path for the
Freedom XC chassis to the DC system ground. See
the following WARNING.
Freedom XC 1800 (12VDC) Owner's Guide