Side Panel - Xantrex Freedom XC 1000 Owner's Manual

Side Panel

1 2
4
Figure 4 Side Panel
ELECTRICAL SHOCK HAZARD
Use a torque screwdriver to tighten the captive nut panel
n
screw to 5 in-lb (0.56 N-m) torque to ensure a proper
ground connection and a required tool access to the wiring
compartment.
Use a torque screwdriver to tighten the bolt on the DC
n
ground lug to a torque of 23 in-lb (2.6 N-m) of force.
Apply an anti-corrosion compound to the copper wire prior
n
to connecting to the DC ground lug.
Failure to follow these instructions can result in death, serious
injury, or equipment damage.
975-0784-01-01
WARNING
Table 3 Side Panel Features
Item
Captive nut panel screw holds the wiring compartment
1
cover in place. See WARNING above.
Wiring compartment cover protects the wiring
compartment from debris and keeps the cables secure.
2 Using the captive nut panel screw, the cover can be
opened and lifted out during wiring. See WARNING on the
3 left.
20 A supplementary protector with reset button
provides overload protection for the optional GFCI kit (sold
3 separately; order PN: 808-9817). Press to recover from an
overload condition. In a hard wired installation, the
supplementary protector does not protect output wiring.
Grounding lug provides a ground path for the Freedom
4
XC chassis to the DC system ground. See WARNING.
Description
Side Panel
11