Side Panel
1
Feature Description
1
15 A supplementary protector provides overload protection for the GFCI receptacles. In
a hard wired installation, the supplementary protector does not protect output wiring.
2
Grounding stud provides a ground path for the
ground.
3
Main cooling fan turns on when powering loads above 500 W or when the internal
temperature reaches a set point temperature.
4
Auxiliary cooling fan
cooling fan.
Rear Panel
2
1
Feature
Description
1
Negative DC cabling terminal connects to the negative terminal of the battery using a
battery cable.
2
Ventilation grille (openings) must not be obstructed for the proper operation of the
cooling fan and inverter. When the inverter is mounted, the ventilation grille must not
point up or down.
3
Positive DC cabling terminal connects to the positive terminal of the battery using a
battery cable.
4
Serial number of your unit.
2–4
(Freedom HF 1800
only) performs the same function as the main
2
3
4
Freedom HF
chassis to the DC system
3
Freedom HF 1000
4
shown
975-0390-01-01