Table of Contents
Advertisement
Chapter 5
| QoS Configuration
QoS Advanced
802.1p-Based
Priority
Figure 20: Configuring Port-Based Priority
Use the 802.1p-Based QoS Mode page to show the mapping of 802.1p priority
values of incoming frames to internal priorities on the switch.
The priority levels recommended in the IEEE 802.1p standard for various network
applications are shown in
switch's output queues in any way that benefits application traffic for the network.
Table 2: QoS Priority Levels
Priority Level
1
2
0 (default)
3
4
5
6
7
Parameters
These parameters are displayed:
802.1p — The QoS value in ingress packets. (Range: 0-7)
Priority — The priority value used by the switch. (Range: 0-7)
Web Interface
To configure QoS 802.1p-based priority:
1.
Click QoS, then QoS Advanced.
Table
2. However, priority levels can be mapped to the
Traffic Type
Background
(Spare)
Best Effort
Excellent Effort
Controlled Load
Video, less than 100 milliseconds latency and jitter
Voice, less than 10 milliseconds latency and jitter
Network Control
– 36 –
Advertisement
Table of Contents
