Edimax ECS1100 Series Web Management Manual page 34

Chapter 5
| QoS Configuration
QoS Basic
Parameters
These parameters are displayed:
Queue ID — The ID of the priority queue. (Range: 0-7)

Strict — Services the egress queues in sequential order, transmitting all traffic in

the higher priority queues before servicing lower priority queues. This ensures
that the highest priority packets are always serviced first, ahead of all other
traffic. (This is the default setting.)
WRR — Weighted Round-Robin shares bandwidth at the egress ports by using

scheduling weights, and servicing each queue in a round-robin fashion.
Weight — Sets a weight for each queue which is used by the WRR scheduler.

(Range: 1-128; Default: Weight of 0 (disabled) is assigned to queues 0 - 7)
WRR Bandwidth — The percentage of bandwidth assigned to each queue

based on the WRR weight.
Web Interface
To configure QoS priority queues:
1.
Click QoS, then QoS Basic.
2.
For each priority queue, select strict or WRR priority.
3.
For queues using WRR priority, set a weight.
4.
Click Apply.
Figure 19: Configuring QoS Basic
– 34 –