Poe System Power - Edimax ECS1100 Series Web Management Manual

Chapter 6
| PoE Configuration

PoE System Power

PoE System Power
2.
Select one or more ports in the Port list.
3.
Set the Control to enable or disable.
4.
Click Apply.
Figure 24: Configuring Port PoE
Use the PoE > PoE System Power page to view the current status of PoE power
usage on the switch.
Parameters
These parameters are displayed:
PoE Powering Port List — The ports currently using PoE power.

PoE Power Budget — The maximum PoE power available to all switch ports.

PoE Power Consumption — The total PoE power currently being used by

connected devices.
PoE Remaining Power — The amount of PoE power still available within the

switch power budget.
Web Interface
To display PoE system power information:
1.
Click PoE, then PoE System Power.
2.
Click Refresh to update the displayed information.
– 42 –