Sfp - Edimax ECS1100 Series Web Management Manual

SFP

Figure 16: Displaying SFP Port Information
Use the Port Configuration > SFP page to display SFP transceiver information. This
page applies only to the ECS1100-10HP switch.
Parameters
These parameters are displayed:
sfpport — The SFP port number.

Temperature — The transceiver working temperature.

Voltage — The transceiver working voltage.

Current — The transceiver working current.

Output power — The transceiver transmit power.

Input power — The transceiver receive power.

OE-Present — Indicates if an optical transceiver is inserted in the slot.

LOS — Indicates a receive loss of signal on the link or no cable connected.

Web Interface
To display SFP port information:
1.
Click Port Configuration, then SFP.
2.
Use the Refresh button to update the page information.
– 29 –
Chapter 3
| Port Configuration
SFP