Table of Contents
Advertisement
IV. Browser Based Configuration Interface
The browser‐based configuration interface enables you to configure the
access point's advanced features. The EW‐7679WAC features a range of
advanced functions such as MAC filtering, MAC RADIUS authentication, VLAN
configurations, up to 32 SSIDs and many more. To access the browser based
configuration interface:
1.
Connect a computer to your access point using an Ethernet cable.
2.
Enter your access point's IP address in the URL bar of a web browser. The
access point's default IP address is 192.168.2.2.
3.
You will be prompted for a username and password. The default
username is "admin" and the default password is "1234", though it was
recommended that you change the password during setup (see II‐2. Basic
Settings).
If you cannot remember your password, reset the access point
back to its factory default settings. Refer to I‐5. Reset
4.
You will arrive at the "System Information" screen shown below.
15
Advertisement
Table of Contents
