Edimax ECS1100 Series Web Management Manual page 23

Flow Control — Enables flow control on the port. Flow control can eliminate

frame loss by "blocking" traffic from end stations or segments connected
directly to the switch when its buffers fill. (Default: Disabled)
Nick Name — Allows you to label an interface. (Range: 1-64 characters)

Web Interface
To configure port settings:
1.
Click Port Configuration, then Port Settings.
2.
Select one or more port numbers.
3.
Set the State to enable.
4.
Optionally configure the Rate/Duplex and Flow Control.
5.
Click Apply.
Figure 11: Configuring Port Settings
– 23 –
Chapter 3
| Port Configuration
Port Settings