Vlan Setting - Edimax ECS1100 Series Web Management Manual

VLAN Setting

Untagged — A port is a member of the VLAN. All packets transmitted by the

port will be untagged, that is, not carry a VLAN tag.
Tagged — A port is a member of the VLAN. All packets transmitted by the port

will be tagged, that is, carry a VLAN tag.
Not Member — A port is not a member of the VLAN. Packets associated with

this VLAN will not be transmitted by the port.
Web Interface
To configure a static VLAN:
1.
Click VLAN, then Static VLAN.
2.
Configure a VLAN ID and optionally a VLAN name.
3.
Select one or more port numbers as tagged or untagged members.
4.
Click Add/Modify.
Figure 17: Configuring Static VLANs
Use the VLAN > VLAN Setting page to configure a management VLAN and set the
default VLAN identifier (PVID) for ports.
Usage Guidelines
You can access the web interface only when the port PVID is the same as the
management VLAN ID.
– 31 –
Chapter 4
| VLAN Configuration
VLAN Setting