Backup Restore - Edimax ECS1100 Series Web Management Manual

Chapter 8
| Tools

Backup Restore

Backup Restore
2.
Click the Select File button and locate the upgrade file.
3.
Click the Upload button.
4.
When the upgrade is complete, reboot the switch.
Figure 33: Upgrading the System Software
Use the Tools > Backup Restore page to save the current switch configuration,
backup the configuration file, and restore a previously saved configuration.
Usage Guidelines
The switch configuration settings are not automatically saved by the system for

subsequent use when the switch is rebooted. You must save these settings to a
configuration file on the switch.
It is recommended to save the current configuration before backing up.

It can take a few minutes to back up or restore the configuration. Do not

perform other operations during this period.
Do not power off during a backup or restore operation, otherwise the switch

may be damaged.
The current configuration is lost when you restore a previous configuration. An

incorrect configuration may cause the switch to be unmanageable.
Parameters
These parameters are displayed:
Save — Saves the current configuration to a file on the switch.

Configuration Backup — Downloads the configuration file to the

management station.
– 54 –