Edimax ECS1100 Series Web Management Manual page 27

You can create up to 2 trunks on the switch.

The ports at both ends of a connection must be configured as trunk ports.

The ports at both ends of a trunk must be configured in an identical manner,

including communication mode (i.e., speed, duplex mode and flow control),
VLAN assignments, and QoS settings.
All the ports in a trunk have to be treated as a whole when moved from/to,

added or deleted from a VLAN.
VLAN and IGMP settings can only be made for the entire trunk.

Parameters
These parameters are displayed:
Port — Selects one or more ports to add as trunk members.

Group ID — Trunk identifier. (Range: 1-2)

Web Interface
To configure port settings:
1.
Click Port Configuration, then Port Trunk.
2.
Select one or more port numbers to add to a trunk.
3.
Select the trunk number (Group ID).
4.
Click Apply.
Figure 14: Configuring Port Trunks
– 27 –
Chapter 3
| Port Configuration
Port Trunk