Chapter 6
| PoE Configuration
PoE Timer Rule
Figure 26: Configuring PD Alive Management
PoE Timer Rule
Use the PoE > PoE Timer Rule page to configure daily time limits during which PoE
power is available on ports.
Usage Guidelines
PoE timer rules can be configured only after setting the system time.
If a timer rule is set and applied to ports, then PoE will be provided to
connected devices only during the specified period.
Rules are assigned to ports using the PoE > PoE Timer Set page.
Parameters
These parameters are displayed:
Rule Name — A name that identifies the timer rule.
Start /End — For each day of the week, specifies start and end times for PoE to
be available on ports.
Edit/Delete — Enables configured rules to be modified or deleted.
Web Interface
To configure PoE timer rules:
1.
Click PoE, then PoE Timer Rule.
2.
Define a name for the rule.
3.
For each day of the week, set the start and end times for the rule.
4.
Click Apply.
– 44 –