Table of Contents
Advertisement
Table 1: Web Page Configuration Buttons (Continued)
Button
Saving the
The switch configuration settings are not automatically saved by the system for
Configuration
subsequent use when the switch is rebooted. You must save these settings to a
configuration file on the switch.
The Apply button only saves settings for the current session. To save all
configuration settings for each reboot, use the Save button on the Tools > Backup
Restore page.
Figure 2: Saving the Switch Configuration
Panel Display
The web agent displays an image of the switch's ports.
Figure 3: Front Panel Indicators
Note:
than the difference in the number and types of ports there are no significant
differences. Therefore, the screen display examples in this manual might be based
on any of the switch models in this series.
Action
Refreshes screen information.
Clears all current information.
Adds or modifies a table entry.
Ends the current web management session.
This manual covers the ECS1100-5P and ECS1100-10HP switches. Other
– 11 –
Chapter 1
| Using the Web Interface
Navigating the Web Browser Interface
Advertisement
Table of Contents
