Priority Queue Mapping - Edimax ECS1100 Series Web Management Manual

Chapter 5
| QoS Configuration
QoS Advanced
Priority Queue
Mapping
4.
Click Apply.
Figure 22: Configuring DSCP-Based Priority
Use the QoS > QoS Advanced page to map QoS values in packets to switch port
priority queues.
Parameters
These parameters are displayed:
Priority — The priority value used by the switch. (Range: 0-7)

Queue — The output port priority queue. (Range: Q0-Q7)

Web Interface
To configure priority queue mapping:
1.
Click QoS, then QoS Advanced.
2.
For each QoS priority value, set a port priority queue.
3.
Click Apply.
– 38 –