802.1X Authentication - Edimax EW-7428HCn User Manual

300n wireless lan high power poe access point

Hide thumbs Also See for EW-7428HCn:

Table of Contents

2-7-5 802.1x Authentication

You can enable 802.1x user identification (based on RADIUS user

authentication server) by checking „Enable 802.1x Authentication‟ box

when you select „Disable‟ or „WEP‟ as encryption type, and the following

message will be displayed:

Here are descriptions of every setup item:

Select SSID

Enable 802.1x

Authentication

RADIUS Server IP

address

RADIUS Server

Port

RADIUS Server

Password

After you finish with setting, please click „Apply‟, and the following

message will be displayed:

Choose the SSID you wish to configure.

Enable or disable the use of 802.1x user

authentication.

Please input the IP address of RADIUS

authentication server here.

Please input the port number of RADIUS

authentication server here. Default value is 1812.

Please input the password of RADIUS

authentication server here.

Table of Contents