Table of Contents
Advertisement
Chapter 3
| Port Configuration
Port Trunk
Port Trunk
Speed — Sets the rate limit level in 1000 bits per second.
(Range: 1-1000000 kbps; Default: 1000000)
Web Interface
To configure port speed limits:
1.
Click Port Configuration, then Port Speed Limit.
2.
Select one or more port numbers.
3.
Set the State for ingress and/or egress to enable.
4.
Set the speed limit level for ingress and/or egress traffic.
5.
Click Apply.
Figure 13: Configuring Port Speed Limits
Use the Port Configuration > Port Trunk page to create assign member ports to a
trunk.
You can create multiple links between devices that work as one virtual, aggregate
link. A port trunk offers an increase in bandwidth for network segments where
bottlenecks exist, as well as providing a fault-tolerant link between two devices.
Usage Guidelines
To avoid creating a loop, configure the trunks before you connect the
corresponding network cables between switches.
– 26 –
Advertisement
Table of Contents
