Analogue Input Range Setting - Datcon DT1102 V Operating Instructions Manual

Function
Sequence of operations 1. Type the appropriate values into fields.
24

7.3. Analogue input range setting

Selectable input ranges:
-25 - +25 mA @ current input
Terminals: Common (7) and Iin (8).
-2.5 - +2.5 V @ voltage 1 input
Terminals: Common (7) and Uin1 (9).
-125 - +125 V @ voltage 2 input
Terminals Common (7) and Uin2 (10).
The initial value and the end value can be set arbitrary within this
range.
[Factory default: 0-22 mA]
2. At the end of the settings click on the
"Write settings to instrument" button, the new settings are written into
the instrument.
The figure shows the factory default setting.
DT1102 V
20230127-V0