Table of Contents
Advertisement
Mounting position
10
4. Mounting
4.1. General instructions
The instrument should be installed in a cabinet with sufficient IP
protection, where the operating conditions are in accordance with
chapter 10.1. Technical specification, as described under the title:
Ambient conditions.
The instruments are designed in a housing for mounting on TS-35 rail.
The instruments should be mounted in vertical position (horizontal rail
position).
Horizontal mounting may cause overheating and damage of the
instrument.
4.2. Main dimensions of the instrument
The following figure shows the main dimensions of the instrument.
DT1102 V
20230127-V0
Advertisement
Table of Contents
