Table of Contents
Advertisement
30
8. Fault rectification
8.1. Fault finding
The fault finding must be carried out by trained and authorized
personnel only!
•
The green indicator is dark
If the supply voltage is OK: the instrument is defective.
•
There is no output signal
input.
When the result of fault finding is that the DT1102 V is defective call
the manufacturer service department.
8.2. Repairing
There is no user repairable part inside the instrument.
In accordance with Point 2.1.: For safety and warranty reasons, any
internal work on the instrument must be carried out only by
DATCON personnel.
→
check the power supply.
→
check the device connected to the
DT1102 V
20230127-V0
Advertisement
Table of Contents
