Analogue Output; Maintenance, Repair - Datcon DT920 User Manual

5.4. Analogue output

The analogue output is an option. In program mode the analogue output can be selected, but
only physically installed outputs can be used, therefore always check the data table of the de-
vice before connecting it, to see whether the given option has been actually installed.
I
analogue
(P5) = 2000
20mA
4 mA
1/ minute
0 2000
.

6. Maintenance, repair

.
The device does not require maintenance, and it does not contain such parts that are repairable
or replaceable by users.
Electrostatic hazard.
Clean only with a moist cloth and detergent
9