Table of Contents
Advertisement
DT1102 V
6.2. Indicator LED-s
The following figure shows the indicators and USB connector on the
DT1102 V front panel.
(2) The blinking light of „error" red indicator indicates different error
states.
(3) The continuous light of „on" green indicator indicates that the
instrument is working.
•
Error state:
"on" indicator: light, "error" indicator: blinking.
The number of blinks gives the error information:
1 blink: fatal error. (repairing: in factory service only).
4 blinks: input range error. (check the settings parameters and the
value of the input signal).
5 blinks: output range error (check the settings parameters).
20
20230127-V0
Advertisement
Table of Contents
