Paper Size And Scanned Area - Ricoh 185 Operating Instructions Manual

Paper Size and Scanned Area

Exposure glass
Reference
position
Horizontal size
Maximum Scanning area
A3
11"x17"
A4 A3
Document Feeder (ADF)
Horizontal size
Maximum Scanning area
(11.7"x47") /
(297x1200mm)
A4 A3
Limitation
There may be a difference in the size of the image when it is printed at the des-
tination.
If you set an original larger than DLT/A3 on the exposure glass, only the
DLT/A3 area is scanned.
Note
Even if an original is correctly placed on the exposure glass or in the Docu-
ment Feeder (ADF), a margin of 3 mm around each edge of the original may
not be sent.
If the receiver uses paper narrower than the original, the image will be re-
duced to fit the paper width. ⇒ P.90 "Auto Reduction"
The machine detects paper sizes in the following ways.
• When you set an original in the Document Feeder (ADF), an original wider
than about 10.4" is scanned as DLT size. Originals narrower than about 9.1"
will be sent as LT/LG size. You can scan in originals of up to 47" in length.
A3
(297x420mm)
(279x432mm)
CP01AEE0
THYS930E
ACCEPTABLE TYPES OF ORIGINALS
1
15