Ricoh 185 Operating Instructions Manual page 195

code, area code (minus the leading
zero) and your fax number in that
order.
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
If the standby display is not
shown, press the {Fax} key.
B
Press the { { { { User Tools/Counter} } } } key.
C
Enter the number of the "Fax".
The Facsimile User Tool main
menu appears.
Reference
For how to use the System User
Tools, refer to the System Set-
tings manual.
D
Enter the function number for
"Key Op. Settings" using the
number keys and press the { { { { #} } } }
(Enter) key within 3 seconds.
Note
If "Key Op. Settings" is not
shown, press [↑ ↑ ↑ ↑ Prev.] or [↓ ↓ ↓ ↓ Next].
KEY OPERATOR SETTINGS
E
Enter the function number for
"G3 Analog Line" using the num-
ber keys.
F
Enter the function number for
"PSTN Line Type" using the
number keys.
G
Select the desired line type and
press [OK].
H
Enter the function number for
"CSI" using the number keys.
I
Enter CSI and press [OK].
In some countries, you can not use
this function.
J
Press [PrevMenu] twice.
7
181