Paper Size And Scanned Area; When Placing An Original On The Exposure Glass - Ricoh 3030 Operating Instructions Manual

Paper Size and Scanned Area

This section explains the size of the area the machine can scan and detect.
Note
❒ There may be a difference in the size of the image when it is printed at the destination.
❒ Even if an original is correctly placed on the exposure glass or in the ADF, a
margin of 3 mm (0.1") around each edge of the original may not be sent.
❒ If the receiver uses paper of a smaller width than the original, the image is re-
duced to fit that paper.
Reference
p.152 "Auto Reduce"

When placing an original on the exposure glass

Important
❒ If you place an original larger than A3, 11" × 17" on the exposure glass, only
an A3, 11" × 17" area is scanned.
• Maximum scan area
The following shows the maximum scan area:
297 × 432 mm/11" × 17" (W × L)
The machine detects paper sizes in the following ways:
❖ Metric Version
Placing Originals
1
ARY001S
43