Entering Text; Entering And Modifying Text; Available Characters; Keys - Ricoh 185 Operating Instructions Manual

ENTERING AND MODIFYING TEXT

This section describes how to enter
characters. When you enter a charac-
ter, it is shown at the position of the
cursor. If there is a character at the
cursor position, the entered character
is shown before the character.

Available Characters

• Alphabetic characters
ABCDEFGHIJKLMNOPQRSTU-
VWXYZabcdefghijklmnopqrstu-
vwxyz
• Symbols
• Numerals
0123456789

Keys

Number keys
Use to enter numbers.
Quick Dial 01/13 to Quick Dial 17/29 (A
to Z)
Press these keys to enter upper and
lower case letters.
[A← ← ← ← → → → → a] key
Use to switch between upper and
lower case.
Quick Dial 14/30
Press to enter a space.
{ { { { Clear/Stop} } } } key
Deletes a character at the cursor
position. You can delete a charac-
ter at the right end of a line even if
the cursor is placed to the right of
the character.

8. Entering Text

0 0 0 0 and 1 1 1 1
Use to move the cursor left or
right.
{ { { { Insert} } } } key
Press if you wish to insert charac-
ters.
Note
If you wish to enter symbols, use
the [Symbols] key.
Flip the plate to access Quick Dial
keys not shown.
Quick Dial 01/13 means Quick
Dial key 01 or 13.
- Wild Cards -
- -
When you register RTIs or CSIs for
multiple destinations, you can regis-
ter a sequence of characters common
to these identifications as a wild card
instead of registering every identifi-
cation.
If a destination has an RTI or CSI con-
taining a wild card, the machine de-
termines that the destination matches
the registered destination.
191