Monitor Volume - Ricoh 185 Operating Instructions Manual

F
When you have checked the total
pages, press [OK].
G
Press [PrevMenu].
H
Press the { { { { User Tools/Counter} } } }
key.

Monitor Volume

You can change the volume of the fol-
lowing sounds the machine makes.
On Hook
When you press the {On Hook Dial}
key.
Transmission
When the machine send a mes-
sage.
Reception
When the machine receive a mes-
sage.
Dialling
After pressing the {Start} key, this
sound is output until the line con-
nects to the destination.
Printing
Sounds when a received message
has been printed. See P.56 "Print
Completion Beep".
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
KEY OPERATOR SETTINGS
Note
If the standby display is not
shown, press the {Fax} key.
B
Press the { { { { User Tools/Counter} } } } key.
C
Enter the number of the "Fax".
The Facsimile User Tool main
menu appears.
Reference
For how to use the System User
Tools, refer to the System Set-
tings manual.
D
Enter the function number for
"Key Op. Settings" using the
number keys and press the { { { { #} } } }
(Enter) key within 3 seconds.
Note
If "Key Op. Settings" is not
shown, press [↑ ↑ ↑ ↑ Prev.] or [↓ ↓ ↓ ↓ Next].
E
Enter the function number for
"Monitor Volume" using the
number keys.
F
Select an item you want to adjust
pressing [↑ ↑ ↑ ↑ Prev.] and [↓ ↓ ↓ ↓ Next].
7
159