Initial Setup Rx - Ricoh 185 Operating Instructions Manual

Facsimile User Tools

INITIAL SETUP RX

The Initial Setup Reception function
allows you to turn the following re-
ception functions on or off.
• Reception Mode P.53 "SELECT-
ING THE RECEPTION MODE"
• Checkered Mark P.56 "Checkered
Mark"
• Center Mark P.56 "Center Mark"
• Print RX Time P.56 "Reception
Time"
• Reverse Order Printing P.58 "Re-
verse Order Printing"
• Authorized RX P.167 "Authorized
Reception"
• Special RX Nos. P.162 "Special
Senders to Treat Differently (Special
RX Nos.)"
• Forwarding P.171 "Forwarding"
• Bypass Paper Size⇒ P.147 "To set
7
the Bypass Paper Size"
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
If the standby display is not
shown, press the {Fax} key.
B
Press the { { { { User Tools/Counter} } } } key.
146
C
Enter the number of the "Fax".
The Facsimile User Tool main
menu appears.
Reference
For how to use the System User
Tools, refer to the System Set-
tings manual.
D
Enter the function number for
"Initial Setup RX" using the num-
ber keys. The Initial Setup RX
menu is shown on the display.
E
Enter the function number of the
item you want to change with the
number keys.
Note
If you make a mistake, press the
{Clear/Stop} key and enter the
correct number.
F
Change the setting with the 0 0 0 0
and 1 1 1 1 keys and press [OK].