Turning the Printer On
Set the power switch to the [I] position to turn on the printer.
The top line of the LCD display reads:
followed by asterisks progressing across the bottom line:
Following a LED self test, asterisks progress across both lines of the display
and the Power On Self Test ends with the top line of the display reading:
NOTE:
While turned on, the printer will go into the standby state if it remains idle for a period of time.If
an error message appears, see "Control Panel LCD Messages" on page 8-20 in the
Intelliprint mL450
Library.
Selecting a Display Language
The default language for all LCD display messages and the Configuration Summary and Test Page
is English. You can change the default language to Espanol, Italiano, Deutsch or Francais.
NOTE:
The language that you select will be reflected on all LCD display messages, and also the
content of the Configuration Summary and Test Page.
Sep 01
GENICOM LN45 and Intelliprint mL450 Installation Guide
Loading
**************
**************
**************
Ready
User's Guide located on the
Genicom
For standard configuration
GENICOM LN45 and Intelliprint 45 Electronic
Publication No. GEG-99122
1-17
LN45 and