English
8.5. RailCom settings
Name
Dynamic
RailCom
information
In order to read out RailCom information, you have to make the following additional settings:
- CV 29 ("configuration data 1": RailCom on
- CV 28 "RailCom channels": at least channel 2 on
RailCom
channels
Please note that some RailCom detectors can only receive messages on channel 1.
For the decoder to send RailCom messages, RailCom must be switched on in CV 29.
Further information on RailCom → Section 4.5
Page 42
No.
Input values
(Default)
10
0,1 (1)
28
0 ... 7
(3)
Remarks and tips
off
Reception statistics:
The decoder keeps statistics on
all DCC packets and reports the
number of faulty packets / total
number of packets in %.
no feedback with RailCom
Channel 1 on
Channel 2 on
Dynamic channel 1 use
The setting only has an effect if channel 1
is switched on.
FD-R Basic.3
0
1
0
1
2
4