Table of Contents
Advertisement
Quick Links
Lokdecoder für Gleichstrommotoren
Locomotive Decoder for DC engines
Décodeur pour locomotive avec moteur continu
Locdecoder voor gelijkstroommotoren
Lokdecoder für Wechselstrommotoren
Locomotive Decoder for AC engines
Décodeur pour locomotive avec moteur alternatif
Locdecoder voor wisselstroommotoren
LD-G-11
Motorola-Format
Motorola format
Format Motorola
Motorola-format
Art.-Nr. 22-01-080
LD-W-11
Motorola-Format
Motorola format
Format Motorola
Motorola-format
Art.-Nr. 22-01-079
n
n
n
n
n
n
n
n
n
Anleitung
n
Manual
n
Mode d´emploi
n
Handleiding
n
n
n
n
Advertisement
Table of Contents
Related Manuals for tams elektronik LD-G-11
Summary of Contents for tams elektronik LD-G-11
- Page 1 LD-G-11 Lokdecoder für Gleichstrommotoren Motorola-Format Locomotive Decoder for DC engines Motorola format Décodeur pour locomotive avec moteur continu Format Motorola Locdecoder voor gelijkstroommotoren Motorola-format Art.-Nr. 22-01-080 Anleitung LD-W-11 Manual Lokdecoder für Wechselstrommotoren Mode d´emploi Motorola-Format Locomotive Decoder for AC engines...
- Page 2 © 09/2006 Tams Elektronik GmbH Alle Rechte, insbesondere das Recht der Vervielfältigung und Verbreitung sowie der Übersetzung vorbehalten. Vervielfältigungen und Reproduktionen jeglicher Form bedürfen schriftlichen Genehmigung durch die Tams Elektronik GmbH. Deutsch Technische Änderungen vorbehalten. English © 09/2006 Tams Elektronik GmbH All rights reserved.
-
Page 3: Table Of Contents
LD-G-11 / LD-W-11 English Table of contents How to use this manual Intended use Safety instructions EMC declaration Operation overview Technical specifications Checking the package contents Required tools and materials Safe and correct soldering Mounting the locomotive decoder Programming the locomotive decoder... -
Page 4: How To Use This Manual
Intended use The locomotive decoder is designed for mounting in a model train with DC motor (LD-G-11) or AC motor (LD-W-11). It evaluates the Motorola format data sent by the digital central unit to its address and controls the locomotive´s motor and additional functions. -
Page 5: Safety Instructions
LD-G-11 / LD-W-11 English Safety instructions Mechanical hazards Cut wires can have sharp ends and can cause serious injuries. Watch out for sharp edges when you pick up the PCB. Visibly damaged parts can cause unpredictable danger. Do not use damaged parts: recycle and replace them with new ones. - Page 6 English LD-G-11 / LD-W-11 Fire risk Touching flammable material with a hot soldering iron can cause fire, which can result in injury or death through burns or suffocation. Connect your soldering iron or soldering station only when actually needed. Always keep the soldering iron away from inflammable materials.
-
Page 7: Emc Declaration
LD-G-11 / LD-W-11 English EMC declaration This product is developed in accordance with the European standards EN 55014 and EN 50082-1, tested corresponding to the EC - directive 89/336/EWG (EMVG of 09/11/1992, electromagnetic tolerance) and meets legal requirements. To guarantee the electromagnetic tolerance you must take the following precautions: §... -
Page 8: Operation Overview
Both decoder types LD-G-11 and LD-W-11 are designed to optimally control their particular motor types. The locomotive decoder LD-G-11 drives the (D.C.) motor with a PWM of 32 kHz. This guarantees a soft and constant run of the motor, with which the decoder can also be used with coreless (Faulhaber) motors. - Page 9 LD-W-11 can be altered by programming the decoder accordingly. Load control The locomotive decoder LD-G-11 for DC motors has a load control, the decoder LD-W-11 for AC motors does not require this function. The load control influences the motor voltage to keep the locomotive at constant velocity, independent of additional loads (e.g.
- Page 10 English LD-G-11 / LD-W-11 Speed level The decoder can drive 27 speed levels. Driving all 27 speed levels can be done only with central units which support this mode (e.g. MasterControl). With central units which only allow 14 speed levels only, it is only possible to select every second speed level.
- Page 11 LD-G-11 / LD-W-11 English Lighting The front and back lighting can be switched on and off according to the direction of travel from the central unit via the function "function"("f0" / "Licht") . CV programming Setting the address, the driving characteristics (starting and maximum...
-
Page 12: Technical Specifications
English LD-G-11 / LD-W-11 Technical specifications Data format Motorola I and II Supply voltage 12-24 Volt digital voltage Current consumption (without connected loads) approx. 10 mA Max. current for motor 1.000 mA Max. current per function output 100 mA Max. total current 1.200 mA... -
Page 13: Safe And Correct Soldering
LD-G-11 / LD-W-11 English § tin solder (0,5 mm. diameter) § wire (diameter: > 0,05 mm² for all connections) Safe and correct soldering Caution: Incorrect soldering can cause dangers through fires and heat. Avoid these dangers by reading and following the directions given in the chapter Safety instructions. -
Page 14: Mounting The Locomotive Decoder
X7. These two connections can be exchanged without effecting functionality. Solder the connections to the motor at the points X9 and X10 (LD-G-11) or at the points X8, X9 and X10 (LD-W-1). In case the locomotive´s direction of motion does not match the direction of motion set at the central unit you should swap the connections at the points X9 and X10. - Page 15 LD-G-11 / LD-W-11 English Disconnect any existing diodes in the leads to the lamps. Connect the lamps for forward motion to X3 and the lamps for reverse to point X2. If the lamps are already connected with one side to locomotive ground, the connection is complete.
- Page 16 English LD-G-11 / LD-W-11 Fixing the locomotive decoder After completing all connections fix the locomotive decoder with double- sided adhesive tape, for example. Using an NEM 652 interface connector Some locomotives already have an NEM 652 interface connector mounted. Using a convenient connecting plug you save disconnecting the connections and you do not need to solder at the locomotive.
-
Page 17: Programming The Locomotive Decoder
LD-G-11 / LD-W-11 English Programming the locomotive decoder With the most digital control units supporting the Motorola II format (e.g. Tams MasterControl, Märklin* Control Unit, Uhlenbrock* Intellibox) you can choose between two methods of programming after having started the programming mode:... - Page 18 English LD-G-11 / LD-W-11 Starting the programming mode Switch on the central unit or perform a reset at the central unit. Set the current address or address 80. Set all functions to "off". For current address Intellibox? or address 80: Set MM I Format.
- Page 19 LD-G-11 / LD-W-11 English Notice: Some types of central units do not allow you to access to the programming mode when the Motorola II format is set (e.g. Intellibox from Uhlenbrock*). These central units must be set to Motorola I format for the current address or the address "80".
- Page 20 English LD-G-11 / LD-W-11 CV-no. Range of values Factory settings Remarks 1, 2, 3 ... 255 Address 1, 2, 3 ... 80 LD-G-11: 4 Starting velocity LD-W-11: 48 1, 2, 3 ... 80 Acceleration delay 1, 2, 3 ... 80 Braking delay 1, 2, 3 ...
- Page 21 LD-G-11 / LD-W-11 English Online-programming After having started the programming mode (and when the locomotive´s lighting flashes) you can perform one of four online programming steps: § directly entering the locomotive address, § performing a decoder reset, § setting the acceleration and braking delay and verifying the settings during driving operation, §...
- Page 22 English LD-G-11 / LD-W-11 Performing a decoder reset Start the programming The locomotive´s lighting flashes regularly. mode (see above) Switch on function F2. The factory settings are restored, all other settings are deleted. decoder automatically returns standard driving operation. Setting the acceleration and braking delay Start the programming The locomotive´s lighting flashes regularly.
-
Page 23: Operation
LD-G-11 / LD-W-11 English Turn the speed control knob until the locomotive drives with the desired maximum velocity. Switch on and off The settings are saved and the locomotive´s "function" (f0) once lighting flashes intermittently. The decoder changes to the setting of the starting velocity (the locomotive runs slower). -
Page 24: Faq
English LD-G-11 / LD-W-11 § Parts are getting too hot and/or start to smoke. Disconnect the system from the mains immediately! Possible cause: One or more connections are soldered incorrectly. à Check the connections. Possible cause: The connection of the motor is connected to locomotive ground. -
Page 25: Manufacturer's Note
LD-G-11 / LD-W-11 English § In digital mode the locomotive suddenly runs very fast. Possible cause: Interfering signals from the layout have switched the decoder to analogue mode. à So long as the interfering signals´ origin cannot be found it is advisable to switch off the automatic recognition of the analogue mode during digital operation. - Page 26 English LD-G-11 / LD-W-11 The following invalidate the warranty: § using an unsuitable soldering iron, solder containing liquid acids or similar, § if damage is caused by not following the instructions in this manual, § if the module has been altered and repair attempts have failed, §...
- Page 27 LD-G-11 / LD-W-11 LD-G-11 / LD-W-11 Fig. 1: Fig. 2: Anschluß LD-G-11 / Connections LD-G-11 Anschluß LD-W-11 / Connections LD-W-11 Connexion LD-G-11 / Aansluiten LD-G-11 Connexion LD-W-11 / Aansluiten LD-W-11 Schleifer / Slider / Frotteur / Sleper Fig. 3: Beleuchtung Rückwärtsfahrt / Lighting reverse direction Anschluß...
- Page 28 LD-G-11 / LD-W-11 LD-G-11 / LD-W-11 Fig. 4: Schaltplan - Circuit diagram - Schéma de principe - Schakelschema Seite - Page - Page - Pagina II Seite - Page - Page - Pagina II...
- Page 29 Actuele informatie en tips: http://www.tams-online.de Garantie und Service: Warranty and service: Garantie et service: Garantie en service: Tams Elektronik GmbH Rupsteinstraße 10 D-30625 Hannover fon: +49 (0)511 / 55 60 60 fax: +49 (0)511 / 55 61 61 e-mail: info@tams-online.de...